My Hyte y70 touch screen not working

[NewbieRD]

I build my 1first gaming pc today the hyte y70 touch and everything works but the y70 screen when I turn on the pc it starts it says Hyte then it goes to No Signal and a black screen i checked everything even connected the usb directly to the MB and the same y have my monitor connected to one DP and it works fine so I connected the hyte screen to that one DP connector where my monitor is connected and it worked but then my monitor won’t work on the other DP connector, is there any way I can fix this or is it a GPU problem ? Help please

 

[Charagma]

If it says Hyte just after switching it on, it sounds as if you have a problem in the BIOS settings and then switches the display off after passing that part of the test in your Bios.

Go into your BIOS settings and then into Video settings. In there, set the video adapter to "auto". Once that is done, try again. If you get the same it could be your OS scanning the wrong resolution. Reboot let it go on and then after sevral times switching it off with the switch it will go into recovery mode. Then boot your windows in safe mode. Once in safe mode, change your resolution to native settings *it will say recommended next to the settings. Reboot and try again.

I am still thinking that since you get the original logo it is merely a setting messing with you and not an actual HW problem.

 

[NewbieRD]

If it says Hyte just after switching it on, it sounds as if you have a problem in the BIOS settings and then switches the display off after passing that part of the test in your Bios.

Go into your BIOS settings and then into Video settings. In there, set the video adapter to "auto". Once that is done, try again. If you get the same it could be your OS scanning the wrong resolution. Reboot let it go on and then after sevral times switching it off with the switch it will go into recovery mode. Then boot your windows in safe mode. Once in safe mode, change your resolution to native settings *it will say recommended next to the settings. Reboot and try again.

I am still thinking that since you get the original logo it is merely a setting messing with you and not an actual HW problem.

The video adapter is set to auto but I can’t boot in to safe mode because then it says my pincode is restored and it won’t let me connect to anything or enter

 

[NewbieRD]

The video adapter is set to auto but I can’t boot in to safe mode because then it says my pincode is restored and it won’t let me connect to anything or ente

If it says Hyte just after switching it on, it sounds as if you have a problem in the BIOS settings and then switches the display off after passing that part of the test in your Bios.

Go into your BIOS settings and then into Video settings. In there, set the video adapter to "auto". Once that is done, try again. If you get the same it could be your OS scanning the wrong resolution. Reboot let it go on and then after sevral times switching it off with the switch it will go into recovery mode. Then boot your windows in safe mode. Once in safe mode, change your resolution to native settings *it will say recommended next to the settings. Reboot and try again.

I am still thinking that since you get the original logo it is merely a setting messing with you and not an actual HW problem.

now is the touch working but on my main display but the screen is still black with no signal