Hi Pc Gamers forum,
I recently build a pc with the specs of
Aorus b450 elite
AMD ryzen 5 3600
Sapphire Radeon 5500xt 8gb pulse
Tforce 16 gb ddr4 3000mhz ram
Kolink 700W 80 Plus Bronze Rated Power Supply
Team Group 250GB SATA Solid State Drive
Seagate 1TB SATA Hard Drive
NZXT Krakken X73 AIO
On the first day the pc start up fine and nothing happens, it even run games smoothly. Then i shut down my pc to manage some of my cables
in my setup. After that i tried to boot up my pc and its stuck with all fans and the AIO Turns on and spinning but its stuck in the red cpu led.
I thought it was the cable because i am sure everything inside is tightly secured and connected in the right slot ( i doubled checked). I tried moving the cable a few times and
the pc boot up fine. i contact the seller of the psu and they replace the psu cable because they thought it was faulty. After the psu cable is replaced i still got the same problem and sometimes the rgb strip in my system turns on and the red led now stuck in the vga. After a few days i realised that the cable is not faulty, i just need to turn the power socket on and off a few times and the pc will boot up normally as usual with some occasion red light cpu or vga. I read a thread in this forum which shows that i need to tune down my ram speed from 3000 mhz to 2400 in the bios ( i used xmp) and it boots normally for a few times before it comes back to the red light cpu bootloop. Can you guys help me with this problem ? Im kindda stuck in this for a few days already and i basically tried everything that i can search in the internet ( turning off xmp, changing cmos battery)
Any help will be helpful
Thanks beforehand
I recently build a pc with the specs of
Aorus b450 elite
AMD ryzen 5 3600
Sapphire Radeon 5500xt 8gb pulse
Tforce 16 gb ddr4 3000mhz ram
Kolink 700W 80 Plus Bronze Rated Power Supply
Team Group 250GB SATA Solid State Drive
Seagate 1TB SATA Hard Drive
NZXT Krakken X73 AIO
On the first day the pc start up fine and nothing happens, it even run games smoothly. Then i shut down my pc to manage some of my cables
in my setup. After that i tried to boot up my pc and its stuck with all fans and the AIO Turns on and spinning but its stuck in the red cpu led.
I thought it was the cable because i am sure everything inside is tightly secured and connected in the right slot ( i doubled checked). I tried moving the cable a few times and
the pc boot up fine. i contact the seller of the psu and they replace the psu cable because they thought it was faulty. After the psu cable is replaced i still got the same problem and sometimes the rgb strip in my system turns on and the red led now stuck in the vga. After a few days i realised that the cable is not faulty, i just need to turn the power socket on and off a few times and the pc will boot up normally as usual with some occasion red light cpu or vga. I read a thread in this forum which shows that i need to tune down my ram speed from 3000 mhz to 2400 in the bios ( i used xmp) and it boots normally for a few times before it comes back to the red light cpu bootloop. Can you guys help me with this problem ? Im kindda stuck in this for a few days already and i basically tried everything that i can search in the internet ( turning off xmp, changing cmos battery)
Any help will be helpful
Thanks beforehand