ARGB connection

[stevejd58]

I'm building a new pc using a Asus B450 Plus and a CiT volcano case
everything is straight forward so far until i got to the RGB fans.
All the 4 fans are interconnected to a male SATA power and a 4 pin case RGB controller terminus
the problem is, I canEdit't see howto connect the fans to the mother board
there is a 4 pin RGB (see image)

https://dlcdnimgs.asus.com/websites/global/products/IVX3AN7A4KtPiMlE/img/aurasync-pic.jpg

 

[Inspireless Llama]

What RGB fans are you using?

If they're Corsair fans, you can't connect Corsair fans to the motherboard using the RGB header, you need to connect that one to a USB header on the mobo.

I don't have experience with other fans unfortunately, but I'd think that if the connector is 4 pin, and your motherboard has a 4 pin header, you should be able to connect them.

 

[stevejd58]

The case description labels them as ARBG rainbow 120mm fans (x4). Can't see any brand names.
The rgb header has a Male connection at the terminal of the ARGB cable, obviously Male to Male is a no go. There is also a power sata connector, the left and right connectors in the image
http://www.aone.co.uk/LI.asp?ProductID=6296&ProductImageID=29773