Question Ankbit E600pro Hybrid Headphones | Bluetooth functionally crapped out suddenly, hasn't functioned wirelessly since.

[Spruce]

A pair of noise-cancelling headphones I had purchased some 4 months ago has seemingly lost all Bluetooth functionality for what appeared to be have happened on a whim.

I'm very unfamiliar with the inner workings of wireless headphones as a whole, so I remain unsure as to how I could restore wireless functionality (if it's even possible).

These are the headphones in question.

I've since lost the manual so I figured I'd come here and ask for tips on how to fix this.

 

[Brian Boru]

Welcome to the forum

Did you follow these instructions on the page you linked to? Did it make any difference?

—…—

＊THE MOSE IMPORTANT NOTICE！！！！

If your headphone doesn't turn on or charge. update the headphone firmware for your E600Pro which will get it to work again.

1.How to download the firmware?

Login ankbit.com, click “Support--Download--Microphone & Headphones, find Ankbit E600Pro Active Noise Cancelling Headphones, then click “Firmware Update”.

2.How to update the firmware?

You’ll get the update guide once you download the firmware, update your E600Pro on a Windows 10 / 11 PC with an USB cable. Plug and unplug the usb cable or change the other USB port of your PC if the update is failed.

3.What should I do if my E600Pro won't connect after the update?

Remove E600Pro from the Bluetooth list of your device, then pair again.

4. What shall i do if my update still failed

Contact seller to get your further support ！

 

[Spruce]

Welcome to the forum

Did you follow these instructions on the page you linked to? Did it make any difference?

—…—

＊THE MOSE IMPORTANT NOTICE！！！！

If your headphone doesn't turn on or charge. update the headphone firmware for your E600Pro which will get it to work again.

1.How to download the firmware?

Login ankbit.com, click “Support--Download--Microphone & Headphones, find Ankbit E600Pro Active Noise Cancelling Headphones, then click “Firmware Update”.

2.How to update the firmware?

You’ll get the update guide once you download the firmware, update your E600Pro on a Windows 10 / 11 PC with an USB cable. Plug and unplug the usb cable or change the other USB port of your PC if the update is failed.

3.What should I do if my E600Pro won't connect after the update?

Remove E600Pro from the Bluetooth list of your device, then pair again.

4. What shall i do if my update still failed

Contact seller to get your further support ！

Hello! Super, super late response, but your methods worked like a charm and my headphones have been functioning well since! Thank you!

 

[Brian Boru]

my headphones have been functioning well since!

Wonderful, and you're welcome

 

[ThinkTank]

And may I add my thanks for your wonderful solution.

I must admit connecting a device that won't power on in order to update the f/w I found a little odd ... but I persevered and lo and behold they now power on and have repaired!

Thank You.

 

[edwardpresta]

A pair of noise-cancelling headphones I had purchased some 4 months ago has seemingly lost all Bluetooth functionality for what appeared to be have happened on a whim.

I'm very unfamiliar with the inner workings of wireless headphones as a whole, so I remain unsure as to how I could restore wireless functionality (if it's even possible).

These are the headphones in question.

I've since lost the manual so I figured I'd come here and ask for tips on how to fix this.

My Ankbit E600 will not turn on after being charged. I went to the web site to download a firmware driver, as instructed in this forum. Unfortunately, I could not find the link. Any help would be appreciated. I'm in Canada if that makes anty difference?

 

[lamelol22]

My Ankbit E600 will not turn on after being charged. I went to the web site to download a firmware driver, as instructed in this forum. Unfortunately, I could not find the link. Any help would be appreciated. I'm in Canada if that makes anty difference?

the same thing has recently happened to me I feel like its a firmware because it was also so randomly Im currently charging my headphones but will look on amazon to see if others are also experiencing this

 

[Colif]

Login ankbit.com, click “Support--Download--Microphone & Headphones, find Ankbit E600Pro Active Noise Cancelling Headphones, then click “Firmware Update”.

it seems in the last year or so they removed all firmware options for headphones. As it should be here:
https://www.1mii.com/download-2/#tab-id-4 - also weird the website name has changed?

i don't suppose its in their app?

https://www.1mii.com/wp-content/uploads/2022/01/E600-Manual-2021.12.21.pdf

 

[Rezawa]

[Mod edit: unreachable link deleted]

i found the firmware but i might have wrecked mine by trying to fix them myself through hardware means since the left side just fell out and wasn't playing