Question Check XMP RAM stability

Sep 21, 2025
9
2
15
I've occasionally experienced crashes with the "radar pre leak" error in the Event Viewer. Since it's so sporadic, it could be a software issue, a problem with a specific game, Windows, etc. However, I've read that it can also be due to RAM instability, and this could be because I have XMP enabled (I'm using Intel).

Is there any software that guarantees 100% RAM stability?

Thanks.
 

CParsons

Staff member
Dec 9, 2019
389
945
11,770
I've occasionally experienced crashes with the "radar pre leak" error in the Event Viewer. Since it's so sporadic, it could be a software issue, a problem with a specific game, Windows, etc. However, I've read that it can also be due to RAM instability, and this could be because I have XMP enabled (I'm using Intel).

Is there any software that guarantees 100% RAM stability?

Thanks.
No software can guarantee that but there's some testing you can do to dig in a little further if you wish:
  • Disable XMP (or set memory to stock/default RAM frequency/timings) in BIOS and test for a few days, see if crashes go away.
  • Use MemTest86 to test memory thoroughly: aim for 2–4 full passes (or more) with no errors.
 
Sep 21, 2025
9
2
15
No software can guarantee that but there's some testing you can do to dig in a little further if you wish:
  • Disable XMP (or set memory to stock/default RAM frequency/timings) in BIOS and test for a few days, see if crashes go away.
  • Use MemTest86 to test memory thoroughly: aim for 2–4 full passes (or more) with no errors.
Since it's so infrequent and difficult to track, disabling XMP and observing isn't feasible, so I want to "force" the failure with synthetic tests in case it's a hardware issue. I'll try with memtest, thanks.
 
Sep 21, 2025
9
2
15
No software can guarantee that but there's some testing you can do to dig in a little further if you wish:
  • Disable XMP (or set memory to stock/default RAM frequency/timings) in BIOS and test for a few days, see if crashes go away.
  • Use MemTest86 to test memory thoroughly: aim for 2–4 full passes (or more) with no errors.

I tested the RAM with two default Memtest86 tests (each running four times through each of the 13 or 14 tests), as well as two one-hour memory tests from OCCT and one hour of the TechPowerUp test.

All tests came back without errors, so I understand that everything is fine and that these were just isolated software glitches.

Thanks.
 
  • Like
Reactions: CParsons

TRENDING THREADS

Latest posts