Question Blue Screen of Death

[Duha]

Hey guys looking for some help please.
NZXT H710i
MSI Z490 Gaming Carbon WiFi
i5 10600k
EVGA RTX 3070 XC Ultra 8GB
Crucial P2 1TB M.2 NVMe ssd
Crucial Ballistic 32GB 3200MHz DDR4 (16x2)
NZXT Kraken X73 rgb
Corsair RM850 Gold

I recently upgraded the ram modules from Kingston HyperX 8GB 3200MHz to the Crucial Ballistic. After the swap when I turned my pc back on it gave me the blue screen of death with the stop code WHEA_UNCORRECTABLE_ERROR. Since then it has only been loading me into bios with the EZ debug LED BOOT lit with a white light. Upon investigating all possibilities I noticed in bios my m.2 ssd isn't showing up. I've tried reseating the ssd, cleaning lightly the ssd, resetting bios and clearing cmos. Nothing is helping. What should I do?

 

[Colif]

tried putting old ram back in and see if it works? only as it did before you swapped them

 

[Brian Boru]

resetting and clearing cos

I'm probably just having a blank spot, but what's "cos"?

I've tried

The obvious is have you tried reseating the new RAM? Putting it in 2 different slots?
Are you sure you've used the right 2 slots as per the motherboard manual?

 

[Duha]

I'm probably just having a blank spot, but what's "cos"?


The obvious is have you tried reseating the new RAM? Putting it in 2 different slots?
Are you sure you've used the right 2 slots as per the motherboard manual?

cmos*

 

[Duha]

I'm probably just having a blank spot, but what's "cos"?


The obvious is have you tried reseating the new RAM? Putting it in 2 different slots?
Are you sure you've used the right 2 slots as per the motherboard manual?

yea ram sticks are in correct spots and seated properly.

 

[Duha]

tried putting old ram back in and see if it works? only as it did before you swapped them

I put in old ram, boot up starts at screen saying "Preparing Automatic Repairs"