Question ARGB lights stopped working on case and cooler

[zyphon]

Just finished (or so I thought) building a pc for my brother. The fan rgb lights were working on both the cpu cooler and the case. They both stopped working (fans still run) as soon as I started messing with drivers. I'm pretty sure all I did was the windows updater, which installed a bunch of drivers. But now for the life of me I can't figure out how to get them back on. I've unplugged and replugged them in, I downloaded mystic light and when adjusting the lights I had it detect on the 2 ports I have them plugged into (Jargb_v2 1 and 2) but still nothing. Any ideas?

Mother board:
Pro b650-p wifi
Case:
phanteks xt pro ultra
Cooler:
Phantom spirit 120 SE ARGB

 

[Brian Boru]

Welcome to the forum

drivers … the windows updater

Recommended driver sourcing in order of preference:

1. Part maker
2. Assembly maker
3. System builder
4. Microsoft

Reason being that this is typically the sequence in which newer drivers will become available—so Microsoft usually last in the chain.

So I recommend you go looking for the newest drivers.

 

[zyphon]

Welcome to the forum



Recommended driver sourcing in order of preference:

1. Part maker
2. Assembly maker
3. System builder
4. Microsoft

Reason being that this is typically the sequence in which newer drivers will become available—so Microsoft usually last in the chain.

So I recommend you go looking for the newest drivers.

Hey thanks!

I've manually installed (from the part maker website) drivers for the gpu, cpu, and the motherboard. Is there a different driver I'm missing that would control the ARGB? I assumed the chipset for the motherboard but nothing.